ServicesGenerator Installation
Generator Installation in Kennedale
When the power drops, you want the fridge cold, the AC or furnace running and the lights on without dragging cords across the floor. We size and install standby generators and portable hookups so your home switches over safely and does what you need.
Backup Power That Fits How You Live
A generator is only as good as the way it is connected. We install permanent standby units that start on their own when utility power fails, and we wire inlets with interlocks or manual transfer switches for homeowners who already own a portable generator. Either way, the generator feeds your home through a proper switch, so it can never backfeed the utility lines or the crews working on them.
Summer storms and the occasional winter ice event can leave a street dark for hours. Before we recommend anything, we sit down with you and list what actually has to run: the refrigerator, a well pump, medical equipment, the HVAC, a home office. That list decides the size. If a smaller unit or a portable hookup covers your needs, we'll tell you so, the same way we'd want a neighbor to tell us.
What Your Generator Installation Includes
Load calculation
We add up the running and starting loads of the circuits you choose. Air conditioners and well pumps draw a big surge on startup, and the generator has to handle that moment, not just the steady load.
Transfer switch wiring
Standby units get an automatic transfer switch that senses an outage and hands your home to the generator. Portable setups get an inlet box and an interlock or manual switch at the panel.
Placement and pad
We help pick a spot that meets the manufacturer's clearances from windows, doors and vents, keeps exhaust away from the house and is easy to reach for service. The unit sits level on a pad sized for it.
Fuel coordination
Natural gas or propane lines are run by a plumber or your gas supplier. We line up the timing so the electrical and fuel work fit together without extra trips.
Permit and inspection
We pull the permit and schedule inspections as your local jurisdiction requires, and we're there to answer the inspector's questions.
Startup and walkthrough
We run the unit under load, test the transfer, set the weekly exercise cycle and show you how to check status and shut it down.
Signs Backup Power Is Worth Considering
- Outages turn into a scramble
- If every storm means tossed groceries and hunting for flashlights, a standby generator takes that off your list.
- Someone's health depends on power
- A CPAP, an oxygen concentrator or medication that has to stay cold can't sit idle until the grid comes back. Backup power keeps them running.
- Extension cords run from a portable
- Cords pushed through a door left ajar carry fire and carbon monoxide risks. An inlet and interlock let your portable feed the panel safely from outside.
- You work from home
- A dead modem and laptop can cost you a full workday. A modest setup that keeps your office circuit and internet gear running makes a real difference.
- Your sump or well pump can't stop
- When the pump goes quiet, water problems follow soon after. Keeping it powered protects the rest of your home.
What to Expect From Start to Finish
- 1
Sizing at a service visit
We check your panel, walk the yard together and talk about what you want running. Your written estimate lists the generator size, the type of switch and any panel work.
- 2
Permit and install dates
We file the permit and plan install days around your schedule and the fuel hookup, so you know when we'll be working outside and when the power will be off.
- 3
Install day
We place the pad and the generator, mount the transfer switch and run the wiring. Your power goes off only while we connect to the panel, and we let you know first.
- 4
Test run and inspection
We fake an outage, check that the system switches over and back to utility power, then meet with the inspector. We clean up the yard and show you how your system works before we go.
What Shapes the Cost
Each generator job is priced on your home and the circuits you pick, not on a package deal. Coverage is the single biggest lever. Our written estimate breaks the job into its parts, so you can see where the money goes and trim or add coverage before any equipment is ordered.
- Generator size and type
- Backing up every circuit in the house calls for a larger standby unit than keeping just the fridge, furnace and a few outlets alive. Wiring an inlet for a portable you already own is the lightest option of all.
- Transfer switch and load management
- An automatic switch is a bigger line item than a manual one. Load management modules take turns powering large appliances, which can let a smaller generator carry a bigger home.
- Panel condition
- A crowded or aging panel sometimes needs attention before a transfer switch can be added. If yours does, we'll walk you through panel upgrades and why the change matters.
- Distance and site work
- Every extra foot between the unit and the panel means more wire and possibly more trenching. A longer gas run also raises the plumber's share of the job.
Generator Questions We Hear Often
- Should I get a standby generator or a portable hookup?
- It depends on how long your outages last and who is home during them. An inlet and interlock for a portable is the less costly route and works fine if you're willing to roll it out and start it yourself. A standby unit turns on by itself, which matters when you're away or someone depends on medical equipment. We go over both at the service visit.
- How big a generator does my house need?
- House size alone won't answer that. We total up the loads you want backed up, including the startup surge from motors like AC compressors and well pumps. That total sets the size, and we show you how we got there.
- Do you handle the permit?
- We do. We obtain the permit, schedule the inspections your local jurisdiction calls for, and consider the job finished only once it passes.
- Is a generator going to be loud for the neighbors?
- Current standby models are quieter than most portables, and the weekly exercise run is short. We can set it for a time that bothers no one and help you choose a spot away from bedroom windows.
- What upkeep does a generator need?
- A standby unit needs its oil, filter and battery looked at on the schedule the manufacturer sets. Our generator service and repair team can handle that so it's ready when the next outage hits.
Ready for the Next Outage
Tell us what you need running when the power goes out. We'll come out, size the system and give you a written estimate you can think over.